Appearance :White powder
Packing: 20kgs bag
Physical state : Solid
Odour : Odorless
Specific gravity: 2.95 to 3.15 g/cm3
Blaine fineness: 2000 or more g/cm2
Bulk density: 1.10 to 1.15 g/cm3
pH: 12 to 13 (Dissolved water)
Water solubility: Partially soluble in water. Will solidify over a period of hours if moistened or wet
● Ready-mixed concrete to minimize cracking due to dry shrinkage and improve water tightness
● Refer to Material Safety Data Sheet (MSDS) before use
● Use a stainless steel or iron agitating blade. Do not use an aluminum blade because hydrogen gas generation could occur and subsequently lead to explosions when mixing the mortar
● Mix grouting material with the specified quantity of water. Using other quantities of water may affect the performance of the non-shrinking mortar
● Use fresh water that does not contain oils, salts, or organic compounds
● Before beginning injecting work, optimize the quantity water in mixing trials and remove oily residues, laitance, and mud from the surface of structure
● Protective gear (goggles, mask, gloves, and rubber boots) should be worn during handling
● Do not dispose of DENKA HP-CSA in drains
● Product in open bags should be used up completely or the bag should be resealed for storage
● The product should be stored in a dry area, indoors, and out of direct sunlight
● For further information, please contact us.
English
