ELOTEX®FX2350 is a flexible product with high ethylene content and neutral rheology. It is especially suitable for formulating mortar coats with good adhesion and impact resistance on polystyrene substrates, while also offering improved deformability and flexural strength. ELOTEX FX2350 shows very low emission levels of volatile organic compounds (VOC), allowing manufacturers to formulate finished products in accordance with stringent eco-labelling requirements, such as EMICODE ECIPLUS.
Applications
External Thermal Insulation Composite Systems(ETICS/EIFS)(adhesive mortars, base(embedding) coats, top (finishing)coatsJ; renders/plasters; tile adhesives(standard C1, ISO13007); repair mortars (non-structural, EN 1504). For any additional applications please contact your local consultant.
Storage
Store ELOTEXO powder in a cool, dry place in original packalging at temperatures not exceeding 25 ℃ and process within six months after the date of delivery. Avoid storing ELOTEX@ powder under pressure, in damaged sacks, in contact with moisture or heat, or in sacks left open for an extended periodd, as this may result in blocking of the powder. If the product is stored for longer than six months after the date of delivery, users are advised to evaluate properties required for the intended use.
Packaging and transport
Standard packaging: 25 kg paper sacks with polyethylene liners. Other types of packaging, such as Big Bags or delivery in silo wagons, are available on request.
Safety and handling
ELOTEXO redispersible powders are not classified as hazardous. However, we recommend all individuals using ELOTEX@redispersible powder, or coming in contact with it, to obsene the separate Safety Data Sheets. Our safety specialists will be pleased to advise you on the safety, health and environmental issues relating to our products. Powder processing;ELOTEXO redispersible powders can be blended in all commercial mixers with other dry additives to produce finished products in powder form. Since ELOTEX@ redispersible powders exhibit thermoplastic behaviour, mixing times should be as short as possible, and significant temperature increases caused by strong shear forces should be avoided. All hydraulically and non-hydraulically curing dry mixtures with ELOTEX@ redispersible powder can be easily mixed with water before application.
English
