Product Features:
1. It has good water solubility and can be completely dissolved in cold water.
2. Adding a small amount of this series of products can achieve great flocculation effect. Generally, only 0.01 ~ 10ppm (0.01 ~
10g / m3) is needed to give full play to the effect.
3. At the same time, the use of this series of products and inorganic flocculants (polyferric sulfate, polyaluminum chloride,
ferric salt, etc.) can show better effect.
Instructions:
1. 0.1-0.3% concentration of water solution, and neutral water without salt impurities is suitable.
2. While dissolving, sprinkle this series of products into the agitated water, and control the stirring speed at 100 ~
300rpm.Proper heating (< 60 ° C) can accelerate dissolution.
3. Adjust the pH value of the treated liquid to make the series of products play a full role (the best pH value and the dosage of
this series of products are selected through the test).
4. While adding the solution of this series of products, it is necessary to accelerate the mixing with the treated liquid, and
slow down the stirring speed after the appearance of flocs, so as to facilitate the growth of flocs and accelerate the
sedimentation.
English
