TEGO XP 22076 Anionic-type Surfactant Complex Powder High Performance Air Entraining Agent

Application 

TEGO ® XP 22076 is a high efficiency powder agent for concrete,  mortar, Gypsum and other building materials system, introduce uniform and  stable tiny bubbles; can be applied Gray mortar, plaster gypsum, putty powder and other dry mortar to  improve its construction and easy Can also be used as a foaming agent in lightweight wall board,  lightweight floor and other lightweight cement base Or gypsum-based component products. 

Technical feature 

· Fast gas diversion rate and high gas extraction efficiency 

· All bubbles and good stability 

· Effectively improve the construction performance and durability of concrete, mortar and cement products (frost  resistance) 

· Good adaptability to the raw materials of different  quality concrete and mortar, especially suitable for mechanism  sand Concrete and mortar system 

· The introduced homogeneous and small pores have little  impact on the strength of concrete and mortar products,  especially Suitable for ultra-high gas content (> 30%) light floor, light wall panel  and other cement base or gypsum base Products, components

Apply 

· Dry powder mortar, such as plastering mortar, putty powder, etc 

· concrete 

· plastering 

· Light floor floor and lightweight wall board 

Use and dosage 

TEGO ® XP 22076 can be routinely mixed or postadded with other types of solid components in the formula. In cement based mortar applications, it is usually recommended to add 0.005-0.02% of total weight of dry formula (50-200 g TEGO ® XP 22076 per ton of dry powder); 0 of total weight of dry formula in gypsum based mortar application.03% (100-300 g TEGO ® XP 22076 per ton of dry powder); 0 of total weight of dry formula.05 - 0 .2% (500-2000 g TEGO ® XP 22076 per ton of dry powder); in other systems, the initial addition can be determined according to the required air content, bulk weight and strength.. 

Stroage

Place the TEGO ® XP 22076 in a dry and clean environment with a  recommended storage temperature of 5 °C To 40 °C. Avoid heavy object extrusion to prevent agglomeration. Self - produced under the recommended storage conditions TEGO ® XP 22076 for 12 months.