VINNAPAS® 5044 N (GER) is a dispersible polymer powder for dry mix mortars, specifically suited for ETICS, water proofing membranes and concrete repair. It is based on a very flexible copolymer of vinyl acetate and ethylene and belongs to the product class VINNAPAS® N which means that it has a neutral effect on rheology and provides the basic properties adhesion and flexibility, giving a high degree of formulation freedom. VINNAPAS® 5044 N (GER) is part of our standard range, offering you the best-in-class solution for a wide variety of applications.
Specification
Bulk density：400 - 550 kg/m³
Ash content 1000 °C： max. 12 % specific method
Particle size： > 400 µm max. 4 %
Solids content： min. 98 %
Minimum film forming temperature：0 °C
Protective colloid / emulsifier system: polyvinyl alcohol
Properties
• VINNAPAS® 5044 N (GER) is a copolymer powder of vinyl acetate and ethylene and is dispersible in water.
• Because of its relatively high ethylene content, this resin is soft and flexible.
• Its glass transition temperature (Tg) is below the freezing point of water.
• Compounds modified with VINNAPAS® 5044 N (GER) exhibit improved adhesion, flexural strength, deformability,
abrasion resistance and are easier to process. Leveling, thixotropy and water retention are essentially unaffected. The
product is ideal for use in combination with other mortar additives intended to enhance specific properties.
• VINNAPAS® 5044 N (GER) contains a fine mineral filler as an antiblocking agent. It is produced without the addition of
organic solvents, plasticizers and film-forming agents.
• VINNAPAS® 5044 N (GER) has no effect on rheological properties and is a general-purpose powder in the lower Tg
range. It is suitable for formulating highly flexible compounds with very good adhesion to organic substrates
(polystyrene) and end products with low emissions.
Storage
During storage, protect the product from contact with moisture. Prolonged storage at temperatures above 30 °C, especially
in combination with pressure, humidity or exposure to sunlight, may result in blocking. Carefully seal any open containers
and store them under suitable conditions. We recommend storing the product in a warehouse that provides cool and dry
conditions. Do not store the product for more than six months, starting from the date at which it was received, unless the
Certificate of Analysis contains a different date, which would take precedence. If the product is stored longer than
recommended, it may still be used but users are advised to verify the properties required for the intended use.
English
